The grease trap pumping is a wonderful tool that helps keep your establishment smelling great, so your customers will keep coming back again and again. The grease trap is also often the leading cause of restaurant complaints, especially if it is not cleaned regularly.
Commercial grease trap pumping in Augusta, GA, can ensure your restaurant runs smoothly, and grease trap maintenance can prevent smelly, expensive backups caused by fats, oils, and grease filling your sewer line.
Process of pumping A Grease trap
- To loosen the grease cap on the interceptor, skim the surface grease and debris from it.
- Solids are sucked up from the grease trap bottom using a vacuum tube submerged in the interceptor.
- When the solids have been removed during grease trap pumping in Charlotte, NC, the interceptor must be vacuumed to remove any remaining water.
- Scrubbing and cleaning the grease trap’s sides and bottom are essential
- A vacuum must be used to remove any remaining water from the cleaning process
- Upon inspecting the receptor, the inlet and outlet sides need to be cleared of obstructions, and the pipe connections need to be firmly secured
- A check is made to ensure the baffles are in place and sturdy
- Ensure that the interceptor is free of cracks and defects by carefully inspecting it
- To prevent grease leaks, technicians for grease trap pumping in rock hill, sc, should ensure that the lid is securely seated, secured, and sealed after cleaning.
Grease traps serve the purpose of preventing clog-inducing materials from entering the city sewers. A grease trap maintenance company must properly dispose of grease mats, sludge, and food particles from grease traps. If contractors improperly dispose of FOG from grease traps, they contribute to the problem.
Chemical agents are commonly used in grease trap pumping in Spartanburg, sc, to dissolve grease to emulsify and then be washed down wastewater drains, which also violates most municipal and city codes. If grease trap waste is not properly disposed of, it can do more harm than good for businesses and grease trap cleaners.
When it is time to replace Grease traps
There comes a time when a grease trap needs to be replaced. Metal grease traps are commonly made of metal, which will corrode over time if not maintained. A grease trap with excessive rust should probably be replaced if it has excessive rust on it. Typically, the lifespan of a metal grease trap is between 5-7 years before it needs to be replaced. Having waste water leaking from the trap directly into the structure would be the last thing you want to happen!
Depending on the location of the grease trap, it may be possible to replace it with a plastic grease trap instead of another metal trap to save on the replacement cost. A plastic trap has the advantage of not rusting over time, like a metal trap, which is one of the main benefits of using one, along with more effective grease trap cleaning in rock hill, sc.
How Grease Trap Pumping Service Company helps
Getting hazardous waste out of grease traps is the job of professionals
Grease traps can contain a variety of waste, including hazardous materials. For this reason, it is only natural to hire a professional. Their working methods for grease trap pumping in charlotte, NC, guarantee safety and efficiency and are governed by law. Restaurants, hospitals, factories, and the food industry are the most suitable clients for this solution.
A service knows the rules and regulations.
The law also imposes obligations on you as a client regarding grease trap cleaning. Grease traps must be cleaned every 90 days, among other things. Depending on state regulations, this deadline may be even shorter. Keeping this obligation in mind could save you from a fine. In contrast, if you have a company doing it regularly for you, they will remind you of your responsibilities. Be careful not to count on it blindly, as it is still your responsibility.
Proper installation of the grease trap
The truth is, even though it may seem that we can do grease trap cleaning in Greenville, sc ourselves, sometimes, that is not the case. It has often happened that restaurant owners have set up the separators themselves. Later, it is discovered that they do not work properly. Professionals will again be called upon to save the day – but they’ll have a double task in such a situation. Make sure you hire a grease trap service instead of setting up the grease trap yourself.
Secure your Service appointment.
The failure of grease traps in restaurants and other food service facilities can lead to various problems that cause noxious odors, backed-up plumbing, and other costly problems. Don’t hesitate to speak with a professional if you see signs of damage to your grease trap – don’t wait – contact a professional about replacing it immediately. However, in most cases, the only thing required for your kitchen to function properly is to conduct a thorough cleaning once a week.
Schedule a service with GE Biofuel for grease trap pumping in Greenville, sc, today. Our grease trap service will ensure your grease trap is in good working order and that you remain in compliance with all local ordinances regarding grease disposal.
